Here are 4 steps

1- Water Steaming

Steaming water in the microwave is an effective method for eliminating odors, as the steam helps to loosen and remove stubborn smells. Here’s a detailed explanation of the process:

Preparation

Start by filling a microwave-safe bowl with water. It’s recommended to use a medium-sized bowl that can hold enough water to generate steam but still fit comfortably inside your microwave.

Microwave Time

Place the bowl of water in the microwave and set the timer for 3 to 4 minutes. This duration allows enough time for the water to heat up and produce steam.

Microwave Power

It’s best to use the highest power setting on your microwave to ensure the water heats up quickly and produces ample steam.

Optional Additions

For stronger odors, consider adding a spoonful of vinegar or lemon juice to the water before heating it. Vinegar and lemon juice have natural deodorizing properties that can help neutralize unpleasant smells.

Safety Precautions

Always use caution when handling hot bowls or containers from the microwave. Use oven mitts or a towel to protect your hands from the heat.

Allow for Steam

After the microwave cycle is complete, let the bowl of water sit in the microwave for a few minutes to allow the steam to circulate and penetrate the interior surfaces.

Ventilation

Open the microwave door carefully to release the steam and allow fresh air to enter. This helps to further dissipate any lingering odors.

Observation

Take a moment to observe if the burning smell has diminished after the steaming process. If the smell persists, proceed to the next step of interior cleaning.

2- Interior Cleaning

interior cleaning of microwave

Cleaning the interior of the microwave is crucial for removing any residual odor and ensuring a hygienic cooking environment. Follow these steps for effective cleaning:

Preparation

Before you start cleaning, gather the necessary supplies. You’ll need a clean towel or microfiber cloth, dish soap, warm water, and optionally, a small brush for hard-to-reach areas.

Dampen the Towel

Fill a bowl with warm water and dip the clean towel or microfiber cloth into it. Wring out the excess water so that the cloth is damp but not dripping.

Add Dish Soap

Apply a small amount of dish soap to the damp towel. The dish soap will help break down grease and grime inside the microwave.

Start Cleaning

Begin wiping down the interior surfaces of the microwave with the damp towel. Pay special attention to areas where food residue may be stuck, such as the walls, ceiling, and door. Use gentle circular motions to effectively clean the surfaces.

Focus on Spills

For stubborn spills or stains, allow the damp towel to sit on the affected area for a few minutes. This will help loosen the residue. Then, gently scrub the area with the towel to remove the stain.

Clean the Turntable and Tray

Remove the turntable and tray from the microwave. Wash them separately with warm, soapy water, ensuring to rinse them thoroughly and dry them completely before placing them back in the microwave.

Check Vents and Seals

Inspect the vents and seals of the microwave for any signs of dirt or debris. Use a damp cloth or small brush to clean these areas and ensure proper ventilation.

Final Wipe Down

After cleaning all interior surfaces, use a clean, damp cloth to wipe down the entire interior once more. This helps to remove any remaining soap residue and ensures a thorough cleaning.

Allow to Dry

Leave the oven door open for a few minutes to allow any excess moisture to evaporate. This will prevent mold or mildew from forming inside the microwave.

Also Read: How To Get Rid Of Cat Pee Smell in Carpet | 6 Proven Steps

3- Rinse and Dry

rinse and dry the microwave

After cleaning the interior of the microwave, it’s crucial to properly rinse and dry it to ensure no soap residue or moisture remains. Here’s a detailed explanation of this step:

Importance of Rinsing and Drying

Rinsing and drying the interior of the oven is essential to remove any leftover soap residue and moisture. This helps prevent the growth of mold and mildew and ensures a clean and hygienic cooking environment.

Use of Damp Cloth

To rinse the interior surfaces, dampen a clean cloth with water. Make sure the cloth is not dripping wet but is adequately damp to wipe away any soap residue.

Starting from the Top

Begin by wiping the interior surfaces of the microwave with the damp cloth, starting from the top and working your way down. Pay attention to all areas, including the walls, ceiling, door, and corners.

Gentle Wiping

Use gentle wiping motions to ensure thorough rinsing while avoiding damaging the interior surfaces of the microwave.

Drying Process

After rinsing, use a dry cloth or paper towel to thoroughly dry the interior surfaces of the microwave. It’s essential to remove all moisture to prevent the growth of mold and mildew.

Open Door for Ventilation

Once the interior is rinsed and dried, leave the microwave door open for a few minutes to allow any remaining moisture to evaporate. This will help ensure the microwave is completely dry before its next use.

Inspect for Residue

After drying, inspect the interior of the microwave for any remaining soap residue or moisture. If necessary, repeat the rinsing and drying process until the interior surfaces are clean and dry.

4- Deodorize Overnight

If the burnt smell persists even after cleaning the microwave, it’s important to take additional steps to eliminate it. Deodorizing the microwave overnight can help neutralize lingering odors effectively. Here’s how to do it:

Explanation of the Step

Deodorizing the microwave overnight involves using natural odor-absorbing substances to neutralize any remaining smells. This step is particularly useful if the burnt smell persists despite cleaning.

Choose Deodorizing Agent

Two common options for deodorizing are dry coffee grounds or baking soda. Both substances are highly effective at absorbing odors and can help freshen up the oven overnight.

Preparing the Microwave

Before placing the deodorizing agent inside the microwave, ensure that the interior surfaces are clean and dry. This will maximize the effectiveness of the deodorizing process.

Placing the Deodorizing Agent

Place a cup or small bowl containing dry coffee grounds or baking soda in the center of the microwave. Make sure the container is microwave-safe and stable to prevent spills.

Set Overnight

Leave the deodorizing agent inside the microwave overnight, allowing it ample time to absorb any remaining odors.

Removing in the Morning

The next morning, carefully remove the cup or bowl containing the deodorizing agent from the oven. Dispose of the used coffee grounds or baking soda appropriately.

Check for Odor

After removing the deodorizing agent, check the microwave for any lingering odors. In most cases, the burnt smell should be significantly reduced or completely eliminated.

Repeat if Necessary

If the burnt smell persists after the first attempt, consider repeating the deodorizing process for another night. Sometimes, stubborn odors may require multiple treatments to fully eliminate

Final Words

In conclusion, knowing how to get rid of burning smell from microwave is essential for maintaining a pleasant and safe kitchen environment. By following the simple yet effective steps outlined, including water steaming, thorough cleaning, and deodorizing, you can eliminate stubborn odors and ensure your oven remains fresh and odor-free. With regular maintenance and attention to cleanliness, you can enjoy cooking without worrying about unpleasant smells lingering in your kitchen.

Frequently Asked Questions (FAQs)

Q: Will burnt microwave smell go away?

A: Yes, with proper cleaning and deodorizing, the burnt smell in the microwave should go away.

Q: How long does it take to get burnt smell out of microwave?

A: The time it takes to remove the burnt smell depends on the severity of the odor and the effectiveness of the cleaning and deodorizing methods used. In many cases, the smell can be significantly reduced or eliminated within a few hours to overnight.